水泥仿木树桩石作为一种户外园林景观小品之一，多用在公园、景区草坪绿化周边等市政景观工程中，和花草树木协调搭配，装饰美观。因外观很像木头，但却又不是木材制作的，次看到它的朋友可能会好奇，他是怎么制作的呢？下面小编给大家讲解一下水泥仿木树桩石的毛胚制作方法和正确安装过程。

Cement imitation wood tree stump stone, as one of the outdoor landscape ornaments, is often used in municipal landscape projects such as parks, scenic areas, lawns, and greenery. It is coordinated and matched with flowers, plants, and trees to achieve beautiful decoration. Because it looks very similar to wood, but is not made of wood, friends who see it for the first time may be curious about how it is made? Below, the editor will explain to you the rough embryo production method and correct installation process of cement imitation wood tree pile stones.

1、要配好钢筋

1. Firstly, it is necessary to prepare the steel reinforcement

仿木树桩石的尺寸为长50公分，高为40公分，5根为一连排。竖的钢筋为4MM的5根，横的钢筋为5MM的2根，

The size of the imitation wood tree stump stone is 50 centimeters long and 40 centimeters high, with 5 pieces arranged in a row. The vertical steel bars are 5 pieces of 4mm, and the horizontal steel bars are 2 pieces of 5mm,

2、把混凝土灌入模具中、静置脱模

2. Pour concrete into the mold and let it stand still for demolding

在灌混凝土之前，需要把钢筋插入到模具孔中，然后再把混凝土倒入仿木树桩石模具中、静置等干脱模图片如下：

Before pouring concrete, it is necessary to insert the steel bars into the mold holes, and then pour the concrete into the imitation wood tree pile stone mold, let it stand, etc. The dry demolding image is as follows:

3、水泥仿木树桩石的正确安装方法

3. The correct installation method for cement imitation wood tree pile stones

A：水泥仿木树桩石的安装方法比较简单，它不像水泥仿木栏杆那样要打一个一个的预埋孔，而是打一排预埋沟，深度约15公分即可；

A: The installation method of cement imitation wood tree pile stones is relatively simple. Unlike cement imitation wood railings, which require pre embedded holes one by one, a row of pre embedded trenches with a depth of about 15 centimeters can be drilled;

B：预埋沟打好以后，从头到尾部放一条直线，即保持水泥仿木树桩石在一条水平线上，安装好就回填混凝土，安装图片如下：

B: After the pre embedded trench is dug, a straight line should be placed from beginning to end, that is, to keep the cement imitation wood tree pile stones on a horizontal line. After installation, backfill concrete. The installation picture is as follows:

水泥仿木树桩石安装方法

Installation Method of Cement Imitation Wood Tree Piles and Stones

C：安装好以后，进行下一步的油漆工艺喷漆处理，油漆采用水泥专用油漆，喷漆前直接将油漆兑水，用木棒调匀，然后用2.5-3.0口径的喷枪喷涂即可，这里需要注意的是水泥树桩石表面需要保持干燥才能喷漆

C: After installation, proceed to the next step of painting process and spray painting treatment. Cement specific paint is used for painting. Before painting, mix the paint with water directly, mix it evenly with a wooden stick, and then spray it with a 2.5-3.0 caliber spray gun. It should be noted that the surface of cement tree stumps needs to be kept dry before painting